SeaVRO
The optimization layer

Voyage Optimizer

Your boat already measures almost everything — engine load, fuel flow, speed, position. Voyage Optimizer plugs into the NMEA 2000 network you already have and turns that stream of data into real savings and earlier warnings.

The payoff

Small adjustments, real money

Most boats spend most of their lives running slightly wrong — a few hundred RPM off the sweet spot, trimmed for yesterday's load, pushing against conditions the skipper can't quantify. Voyage Optimizer finds your vessel's actual efficiency curve from its own data and coaches you toward it, targeting fuel savings in the 3–8% range trip after trip. On a boat that burns serious fuel every season, that pays for itself fast.

VOYAGE OPTIMIZER LIVE FUEL BURN · MADE GOOD 2.4 L / nm ▼ 6.2% EFFICIENCY CURVE 2000 3400 4800 RPM sweet spot you RECOMMENDATION Ease back to 3,400 RPM saves ≈ 9 L over the next hour ENGINE HEALTH Port · nominal Stbd · nominal
The helm dashboard, on the phone already in your pocket.

What it does

Four jobs, one small box

Live fuel-per-mile

Not gallons per hour — cost per mile made good, in real time. The single number that tells you whether your current speed, trim, and route are actually efficient.

Speed & trim guidance

Learns your vessel's efficiency curve across loads and conditions, then recommends the RPM and trim that get you there for the least fuel — updated as conditions change.

Engine health watch

Continuously baselines your engines and flags drift — the slowly climbing temperature or falling fuel efficiency that precedes a breakdown — before it becomes a tow home.

Your phone is the display

No new screen to buy or flush-mount. Voyage Optimizer serves its dashboard straight to the phone or tablet at your helm over the boat's own Wi-Fi.

Installation

Plug in, cast off

Voyage Optimizer is a compact device that drops onto your existing NMEA 2000 backbone with a single tee connector. It identifies your engines automatically and starts learning from the first trip.

Tee in

One connector onto the NMEA 2000 backbone your boat already has. No engine modifications, no rewiring.

Auto-detect

The system recognizes the engines and sensors on the network and configures itself around your specific boat.

Learn & advise

Every trip refines its model of your vessel. Guidance appears on your phone; you stay in command.

NMEA 2000 BACKBONE Engines GPS Sensors SeaVRO box one tee connector · listening only 2.4 L/nm your phone
One tee onto the network you already have. Data flows out; nothing flows back in.
Listening-only, by design. Voyage Optimizer reads data from the network — it never sends control commands to engines, steering, or any vessel system. It advises; the skipper decides. That principle is engineered in, not bolted on.

One platform

Better together with DriftWatch

Voyage Optimizer and DriftWatch share hardware philosophy and a common platform. The optimization layer knows where your boat is going and how it's running; the vision layer knows what's in the water ahead. Together they point toward routes that are both efficient and clear of hazards — the full meaning of Vision, Routing & Optimization.

Burn less. Break down less.

Voyage Optimizer is in on-water testing now. Join the waitlist to be first in line.

Join the waitlist